Merge pull request #1268 from maximus64/add-opendiag-d1a6

Add PID 1209:D1A6 for Maximus64 OpenDIAG OBD2 Interface

Author: cnlohr

1209/D1A6/index.md

@@ -0,0 +1,21 @@
+---
+layout: pid
+title: OpenDIAG OBD2 Interface
+owner: Maximus64
+license: GPLv3 and CERN-OHL-S-2.0
+site: https://github.com/maximus64/opendiag-hardware
+source: https://github.com/maximus64/opendiag-firmware
+---
+OpenDIAG is an open source OBD2 diagnostic interface for reading and clearing
+vehicle diagnostic trouble codes, streaming live sensor data, and accessing
+manufacturer-specific ECU functions. The device presents itself as a USB CDC
+serial port to the host.
+
+The hardware is an ESP32-S3 based board using the chip's native USB and TWAI
+(CAN) peripherals, with a CAN transceiver, K-line, and J1850 PWM/VPW
+interfaces published under CERN-OHL-S-2.0 at
+[opendiag-hardware](https://github.com/maximus64/opendiag-hardware). The
+firmware is licensed GPLv3 at
+[opendiag-firmware](https://github.com/maximus64/opendiag-firmware), and a
+companion host-side tool is available at
+[opendiag-cli](https://github.com/maximus64/opendiag-cli).

org/Maximus64/index.md

@@ -0,0 +1,7 @@
+---
+layout: org
+title: Maximus64
+site: https://github.com/maximus64
+---
+Hardware hacker building open source electronic devices, with a focus on
+reverse engineering embedded systems and automotive electronics.