Repository navigation
Problem when installing Heltec in MacOS Big Sur #10
Description
Hello, I have the Heltec Lora ESP32 v2 module and I cannot manage to use Arduino on a macOS Big Sur 11.2.2
I have followed the instructions on the official webpage but I am getting the following error
- I have installed the board Heltec ESP32 Series Dev Board version 0.0.5
- I have installed the Heltec ESP32 Dev-Boards version 1.1.0
- When compiling the example
Wifi_Lora_32FactoryTestI get this error:
Traceback (most recent call last):
File "esptool.py", line 57, in <module>
File "/Library/Python/2.7/site-packages/PyInstaller/loader/pyimod03_importers.py", line 389, in load_module
File "serial/tools/list_ports.py", line 29, in <module>
File "/Library/Python/2.7/site-packages/PyInstaller/loader/pyimod03_importers.py", line 389, in load_module
File "serial/tools/list_ports_posix.py", line 31, in <module>
File "/Library/Python/2.7/site-packages/PyInstaller/loader/pyimod03_importers.py", line 389, in load_module
File "serial/tools/list_ports_osx.py", line 32, in <module>
ValueError: dlsym(RTLD_DEFAULT, kIOMasterPortDefault): symbol not found
Failed to execute script esptool
Do you know how I can compile & run code with this board?
Thank you
Activity
josmanperez commentedon Apr 9, 2021
I will leave here the solution for this problem if someone is facing the same behavior. All the thanks to @Elijahg who solve this in this post
You only need to adapt it to Heltec-esp32.
A better fix for this is to install a new version of Python with brew, which has been patched, this fixes it when using esptool.py directly, but esptool through Arduino also requires replacing the binary esptool in the Arduino ESP32 package with the source script.
Since I upgraded rather than doing a fresh install, I had another bug where brew failed because the Command Line Tools was too old, but software update thought it was current. So had to delete the old CommandLineTools in /Library/Developer/CommandLineTools. I also reinstalled Xcode to be safe. After deleting the CommandLineTools directory, do
sudo xcode-select --installto install the new version, and afterwardsudo xcodebuild -licenseto accept the new license.Then if you don't have it, get Homebrew (at http://brew.sh/), and do
brew install --build-from-source pythonThis should then install a non-broken Python, you'll probably have to add
/usr/local/bin/pythonto your$PATHto use it.You may need to install pyserial with
/usr/local/bin/pip3 install pyserialor/usr/local/bin/pip install pyserialdepending on the Python version being used. Installing both won't do any harm.To fix Arduino, you'll need to download the
esptool.pysource here: https://github.com/espressif/esptool/blob/master/esptool.pyOpen
~/Library/Arduino15/packages/Heltec-esp32/tools/esptool_py/2.6.1/and renameesptooltoesptool.old, and put the downloaded esptool.py into this same directory. When you've done that, rename esptool.py to esptool, and in the terminal set the executable bit:chmod +x ~/Library/Arduino15/packages/Heltec-esp32/tools/esptool_py/2.6.1/esptoolThis might be enough to fix it. If you still get the same symbol not found error then open
~/Library/Arduino15/packages/Heltec-esp32/tools/esptool_py/2.6.1/esptooland change the first line from#!/usr/bin/env pythonto#!/usr/local/bin/python3Credit to Loumikas below for the last part!
Hope that helps someone.