Arduino support #24

Activity

1. ronnytittoto commented on Aug 14, 2018

   

   ronnytittoto

   on Aug 14, 2018

   More actions

   Check these projects, would they help?
   https://github.com/arduino-libraries/ArduinoBearSSL
   https://github.com/arduino-libraries/ArduinoECCX08
   https://github.com/CryptoThings/AtCryptoAuthLib
2. bryan-hunt

   added

   enhancement

   on Aug 30, 2018
3. Misiu commented on Jan 18, 2019

   

   Misiu

   on Jan 18, 2019

   More actions

   @bryan-hunt it would be awesome to have an official library.
   I'm developing using https://github.com/esp8266/Arduino so Arduino/ESP8266/ESP32 support would be awesome!
   https://github.com/CryptoThings/AtCryptoAuthLib is a good starting point

   👍React with 👍1Reacted by Gábor Gyenge
4. GabrielNotman commented on Jan 22, 2019

   

   GabrielNotman

   on Jan 22, 2019

   More actions

   @gyengus @Misiu I have been working on fork here: https://github.com/GabrielNotman/cryptoauthlib

   I still need to add some instructions and examples but here are the main points:

   • The library needs to be installed in one of the Arduino library folders (not the sketch folder).
   • Currently only implements i2c and i2c bitbang.
   • Arduino HAL selection is done via /src/arduino_hal_select.h
   • For i2c, bus 0 must be selected (multi-bus support is not supported yet).

   I've tested it with a SAMD21 based board. For AVR boards you might need to use bitbang due to Wire buffer sizes.

   👍React with 👍1Reacted by Gábor Gyenge
5. gannaramu commented on Nov 8, 2020

   

   gannaramu

   on Nov 8, 2020

   More actions

   @GabrielNotman any plans of syncing it up with the latest release from Microchip? I was looking to use with the Atecc Trust and Go chips ATECC608 TNGTLS.
6. GabrielNotman commented on Nov 15, 2020

   

   GabrielNotman

   on Nov 15, 2020

   More actions

   @gannaramu I'm currently working on updating it to v3.2.4.
7. gannaramu commented on Nov 15, 2020

   

   gannaramu

   on Nov 15, 2020

   More actions

   @GabrielNotman That would be really helpful!. I can help you test things I have a cryptoauth trust platform connected to a teensy4.0 board. For the past couple of days, I have been modifying the https://github.com/sparkfun/SparkFun_ATECCX08a_Arduino_Library to be able to read the X509 certificate stored in the device. I was still not sure how to decompress the certificate to a PEM format. Could you please guide me with any relevant resources?.

   Thanks
   Ram Rohit