Version Packages

[github-actions]

This PR was opened by the Changesets release GitHub action. When you're ready to do a release, you can merge this and publish to npm yourself or setup this action to publish automatically. If you're not ready to do a release yet, that's fine, whenever you add more changesets to main, this PR will be updated.

Releases

@openspec-ui/cli@0.24.0

Minor Changes

• 7c87236: A Pipeline card works its change's tasks in the worktree made for it. A
  task's hint now holds all of it, and selecting a task opens it whole beside
  the board. For a change in its own worktree, a card closes or reopens a
  task with a note written under it (required for a Human-only or delegated
  task), commits that tasks.md alone and pushes the branch, and runs a
  delegated task on its agent. Refused while a run works there. The change's
  name opens its task list where it is worked: tasks.md from the worktree
  in the editor, which looked only in this checkout and so opened nothing for
  a change not yet merged; a page of its own in a new browser tab in the
  standalone app. An open card can hide its done tasks. From a terminal:
  openspec-ui-cli task done|reopen <change> <number> [--note] and
  openspec-ui-cli task commit <change>. Cards read from anywhere else stay
  read-only (ADR 0026, amended).

• 5f45ce9: A failed run says what is known about why, and the supervisor points out
  runs that need you. When a run fails, its reason and the end of what it
  printed are matched against causes that have been seen: the agent is not
  installed, not signed in, blocked by the machine, cannot reach the
  network, was rate-limited, or the service failed. The diagnosis says
  whether repeating can help, quotes the line it was found in, and says what
  to do instead. It is shown beneath the failure in both hosts, on the
  change's card and in openspec-ui-cli run.

  The supervisor (supervisor.mode, advise by default) adds three
  suggestions beside the others in the Pipeline and in openspec-ui-cli advise: a run that has said nothing new for longer than
  supervisor.silentAfterSeconds (600), a run that has waited on a person
  for longer than supervisor.waitingAfterSeconds (60), and a change whose
  last run failed for a cause repeating cannot fix. It suggests and changes
  nothing. Set it to Off from either Harness Settings view.

@openspec-ui/core@0.133.0

Minor Changes

• 7c87236: A Pipeline card works its change's tasks in the worktree made for it. A
  task's hint now holds all of it, and selecting a task opens it whole beside
  the board. For a change in its own worktree, a card closes or reopens a
  task with a note written under it (required for a Human-only or delegated
  task), commits that tasks.md alone and pushes the branch, and runs a
  delegated task on its agent. Refused while a run works there. The change's
  name opens its task list where it is worked: tasks.md from the worktree
  in the editor, which looked only in this checkout and so opened nothing for
  a change not yet merged; a page of its own in a new browser tab in the
  standalone app. An open card can hide its done tasks. From a terminal:
  openspec-ui-cli task done|reopen <change> <number> [--note] and
  openspec-ui-cli task commit <change>. Cards read from anywhere else stay
  read-only (ADR 0026, amended).

• 5f45ce9: A failed run says what is known about why, and the supervisor points out
  runs that need you. When a run fails, its reason and the end of what it
  printed are matched against causes that have been seen: the agent is not
  installed, not signed in, blocked by the machine, cannot reach the
  network, was rate-limited, or the service failed. The diagnosis says
  whether repeating can help, quotes the line it was found in, and says what
  to do instead. It is shown beneath the failure in both hosts, on the
  change's card and in openspec-ui-cli run.

  The supervisor (supervisor.mode, advise by default) adds three
  suggestions beside the others in the Pipeline and in openspec-ui-cli advise: a run that has said nothing new for longer than
  supervisor.silentAfterSeconds (600), a run that has waited on a person
  for longer than supervisor.waitingAfterSeconds (60), and a change whose
  last run failed for a cause repeating cannot fix. It suggests and changes
  nothing. Set it to Off from either Harness Settings view.

openspec-ui-vscode@0.92.0

Minor Changes

• 7c87236: A Pipeline card works its change's tasks in the worktree made for it. A
  task's hint now holds all of it, and selecting a task opens it whole beside
  the board. For a change in its own worktree, a card closes or reopens a
  task with a note written under it (required for a Human-only or delegated
  task), commits that tasks.md alone and pushes the branch, and runs a
  delegated task on its agent. Refused while a run works there. The change's
  name opens its task list where it is worked: tasks.md from the worktree
  in the editor, which looked only in this checkout and so opened nothing for
  a change not yet merged; a page of its own in a new browser tab in the
  standalone app. An open card can hide its done tasks. From a terminal:
  openspec-ui-cli task done|reopen <change> <number> [--note] and
  openspec-ui-cli task commit <change>. Cards read from anywhere else stay
  read-only (ADR 0026, amended).

• 5f45ce9: A failed run says what is known about why, and the supervisor points out
  runs that need you. When a run fails, its reason and the end of what it
  printed are matched against causes that have been seen: the agent is not
  installed, not signed in, blocked by the machine, cannot reach the
  network, was rate-limited, or the service failed. The diagnosis says
  whether repeating can help, quotes the line it was found in, and says what
  to do instead. It is shown beneath the failure in both hosts, on the
  change's card and in openspec-ui-cli run.

  The supervisor (supervisor.mode, advise by default) adds three
  suggestions beside the others in the Pipeline and in openspec-ui-cli advise: a run that has said nothing new for longer than
  supervisor.silentAfterSeconds (600), a run that has waited on a person
  for longer than supervisor.waitingAfterSeconds (60), and a change whose
  last run failed for a cause repeating cannot fix. It suggests and changes
  nothing. Set it to Off from either Harness Settings view.

Patch Changes

• Updated dependencies [7c87236]
• Updated dependencies [5f45ce9]
  • @openspec-ui/core@0.133.0
  • @openspec-ui/webui@1.81.0
  • @openspec-ui/server@1.53.0

@openspec-ui/server@1.53.0

Minor Changes

• 7c87236: A Pipeline card works its change's tasks in the worktree made for it. A
  task's hint now holds all of it, and selecting a task opens it whole beside
  the board. For a change in its own worktree, a card closes or reopens a
  task with a note written under it (required for a Human-only or delegated
  task), commits that tasks.md alone and pushes the branch, and runs a
  delegated task on its agent. Refused while a run works there. The change's
  name opens its task list where it is worked: tasks.md from the worktree
  in the editor, which looked only in this checkout and so opened nothing for
  a change not yet merged; a page of its own in a new browser tab in the
  standalone app. An open card can hide its done tasks. From a terminal:
  openspec-ui-cli task done|reopen <change> <number> [--note] and
  openspec-ui-cli task commit <change>. Cards read from anywhere else stay
  read-only (ADR 0026, amended).

• 5f45ce9: A failed run says what is known about why, and the supervisor points out
  runs that need you. When a run fails, its reason and the end of what it
  printed are matched against causes that have been seen: the agent is not
  installed, not signed in, blocked by the machine, cannot reach the
  network, was rate-limited, or the service failed. The diagnosis says
  whether repeating can help, quotes the line it was found in, and says what
  to do instead. It is shown beneath the failure in both hosts, on the
  change's card and in openspec-ui-cli run.

  The supervisor (supervisor.mode, advise by default) adds three
  suggestions beside the others in the Pipeline and in openspec-ui-cli advise: a run that has said nothing new for longer than
  supervisor.silentAfterSeconds (600), a run that has waited on a person
  for longer than supervisor.waitingAfterSeconds (60), and a change whose
  last run failed for a cause repeating cannot fix. It suggests and changes
  nothing. Set it to Off from either Harness Settings view.

Patch Changes

• Updated dependencies [7c87236]
• Updated dependencies [5f45ce9]
  • @openspec-ui/core@0.133.0

@openspec-ui/webui@1.81.0

Minor Changes

• 7c87236: A Pipeline card works its change's tasks in the worktree made for it. A
  task's hint now holds all of it, and selecting a task opens it whole beside
  the board. For a change in its own worktree, a card closes or reopens a
  task with a note written under it (required for a Human-only or delegated
  task), commits that tasks.md alone and pushes the branch, and runs a
  delegated task on its agent. Refused while a run works there. The change's
  name opens its task list where it is worked: tasks.md from the worktree
  in the editor, which looked only in this checkout and so opened nothing for
  a change not yet merged; a page of its own in a new browser tab in the
  standalone app. An open card can hide its done tasks. From a terminal:
  openspec-ui-cli task done|reopen <change> <number> [--note] and
  openspec-ui-cli task commit <change>. Cards read from anywhere else stay
  read-only (ADR 0026, amended).

• 5f45ce9: A failed run says what is known about why, and the supervisor points out
  runs that need you. When a run fails, its reason and the end of what it
  printed are matched against causes that have been seen: the agent is not
  installed, not signed in, blocked by the machine, cannot reach the
  network, was rate-limited, or the service failed. The diagnosis says
  whether repeating can help, quotes the line it was found in, and says what
  to do instead. It is shown beneath the failure in both hosts, on the
  change's card and in openspec-ui-cli run.

  The supervisor (supervisor.mode, advise by default) adds three
  suggestions beside the others in the Pipeline and in openspec-ui-cli advise: a run that has said nothing new for longer than
  supervisor.silentAfterSeconds (600), a run that has waited on a person
  for longer than supervisor.waitingAfterSeconds (60), and a change whose
  last run failed for a cause repeating cannot fix. It suggests and changes
  nothing. Set it to Off from either Harness Settings view.

Patch Changes

• Updated dependencies [7c87236]
• Updated dependencies [5f45ce9]
  • @openspec-ui/core@0.133.0